YDPE Series Wheeled Mobile Jaw Crusher Plant
4 Models | Capacity: 16–210 t/h | Max Feed: up to 650mm | Road-Towable Tire Chassis
The Hengtai YDPE Series Wheeled Mobile Jaw Crusher Plant is a high-performance primary crushing solution that integrates jaw crushing technology with a road-towable tire-mounted chassis. By mounting the complete crushing system on a heavy-duty wheeled trailer, the YDPE series overcomes the site constraints of conventional fixed crushing lines — delivering immediate, on-site primary crushing capability wherever raw material is located.
Each unit integrates a jaw crusher, ZW-series vibrating feeder with built-in pre-screening, discharge belt conveyor, optional screening module, and a smart electrical control system on a single chassis. Feed speed and discharge gap can be adjusted in real time to match varying material sizes and production targets. Since its launch, the YDPE series has been widely adopted in construction waste recycling, mining operations, and infrastructure projects — recognized for quick relocation, strong primary crushing performance, and stable long-term operation.
Wheeled & Road-Towable Mobility
Heavy-duty tire chassis with hydraulic outriggers, towed directly by standard truck — no disassembly required. Relocation time reduced by over 80%, breaking fixed site limitations for multi-site quarry and mining operations.
High-Efficiency Primary Jaw Crushing
Jaw compressive crushing fills the chamber with material, delivering strong large-lump processing capability. Handles medium-hard to ultra-hard feed up to 650mm, producing uniform output across a capacity range of 16–210 t/h.
All-in-One Design, Easy Operation
Crusher, feeder, conveyor, and control system integrated on one chassis. One-button start, outrigger-leveled and production-ready within 2 hours — no foundation work or on-site assembly needed. Reduces labor cost and operational complexity.
Robust Structure, Wide Adaptability
Thick-wall steel welded frame, high wear-resistant alloy for critical components, anti-skid tires and impact guards. Engineered for harsh mine and construction site environments — low failure rate, long service life, easy wear-part replacement.
Product Gallery
Operational Video Demonstration
Working Principle
Phase 1 — Site Positioning: The plant is towed to the work site by a standard truck. Hydraulic outriggers are extended and adjusted to level the chassis on uneven ground. The discharge conveyor angle and jaw crusher gap are then set according to the target output size. The unit is ready to operate within approximately 2 hours of arrival — no foundation work or on-site assembly required.
Phase 2 — Crushing Operation: Motor power is transmitted to the jaw crusher's eccentric shaft, driving the movable jaw in a reciprocating swing motion. Material is fed uniformly into the crushing chamber by the vibrating feeder, where it is broken by the compressive and splitting force between the fixed and movable jaw plates. Crushed material discharges onto the main belt conveyor and is transported to the designated stockpile. For further size reduction, the YDPE plant can be linked in series with a Wheeled Mobile Impact Crusher or a Wheeled Mobile Cone Crusher to form a complete two-stage mobile crushing circuit.
Core Components
1Main Crushing System
High-strength jaw crusher with heavy-duty jaw plates and optimized chamber geometry. Performs initial high-force crushing of large boulders, raw ore, and demolition concrete, achieving the first-stage size reduction that sets the foundation for all downstream processing.
2Feeding System
ZW-series vibrating feeder delivers raw material uniformly, continuously, and at a controllable rate to the jaw crusher. The built-in pre-screening function simultaneously removes soil and fine particles, improving crusher efficiency, preventing blockages, and reducing liner wear.
3Conveying System
Main discharge belt conveyor efficiently transports crushed aggregate from the jaw crusher to the stockpile. Optional side or return conveyor enables closed-circuit crushing or multi-grade stockpiling, allowing simultaneous output of different product sizes.
4Power System
Diesel generator set powers the entire station independently — enabling full operation at off-grid sites such as remote quarries or demolition yards. Where stable grid power is available, an external electric motor connection is supported for lower operating cost and reduced emissions.
Technical Specifications
All four standard models are listed below. Custom configurations available on request.
| Parameter | YD-PE400×600 -ZW1032 |
YD-PE500×750 -ZW1032 |
YD-PE600×900 -ZW1234 |
YD-PE750×1060 -ZW1340 |
|---|---|---|---|---|
| ▎ Vibrating Feeder | ||||
| Feeder Model | ZW1032 | ZW1032 | ZW1234 | ZW1340 |
| Max Feed Size (mm) | <500 | <500 | <600 | <650 |
| Processing Capacity (t/h) | 60–80 | 60–80 | 80–120 | 100–150 |
| Motor Power (kW) | 15 | 15 | 18.5 | 18.5 |
| Hopper Size — W×L (mm) | 1000×3200 | 1000×3200 | 1200×3400 | 1300×4000 |
| ▎ Jaw Crusher | ||||
| Jaw Crusher Model | PE400×600 | PE500×750 | PE600×900 | PE750×1060 |
| Feed Opening Size (mm) | 400×600 | 500×750 | 600×900 | 750×1060 |
| Max Feed Size (mm) | 340 | 425 | 500 | 630 |
| Discharge Gap Range (mm) | 40–100 | 50–100 | 65–160 | 80–140 |
| Jaw Crusher Capacity (t/h) | 16–65 | 50–100 | 50–120 | 115–210 |
| Motor Power (kW) | 30 | 55 | 55–75 | 110 |
| ▎ Complete Plant | ||||
| Belt Conveyor Model | B650 | B650 | B800 | B800 |
| Plant Capacity (t/h) | 16–65 | 50–100 | 50–120 | 120–210 |
Frequently Asked Questions
The Hengtai YDPE series can process materials with Mohs hardness ≤9, including medium-hard to ultra-hard rocks such as granite and basalt. For extremely abrasive materials, customized wear-resistant jaw plate upgrade packages are available upon request.
No disassembly is required. The integrated tire chassis design allows direct towing by a standard truck. On site, only hydraulic outrigger leveling is needed before operation begins. Total relocation time is typically ≤2 hours.
Key maintenance focuses on monitoring wear of jaw plates and conveyor belts, and regularly inspecting the eccentric shaft lubrication status. The integrated smart control system provides real-time maintenance reminders, reducing manual inspection costs and minimizing unplanned downtime.
Yes. Capacity can be regulated by adjusting the discharge gap (CSS) and feed rate via the vibrating feeder speed control. The YDPE series covers 16–210 t/h across four standard models. Custom non-standard configurations are also available based on specific project requirements.
Matched Equipment for Complete Production Line
The YDPE jaw crusher plant serves as the primary crushing stage. Pair it with the following equipment to build a complete mobile crushing circuit:
Get Professional Technical Catalog & Factory Price Quote
Our engineers customize solutions tailored specifically to your project requirements, target capacity, and local conditions.